Streamline Your Spider Rig Setup to Catch More Crappie

streamline your spider rig to catch more crappie

Streamline Your Spider Rig Setup for More Crappie

Streamline your spider rig setup is an excellent way to catch more crappie in a variety of situations. The technique involves multiple rods with multiple baits. The rods, up to 8 or more, are fanned out, usually at the bow of the boat and resembles a spider’s legs. Hence the name. This spread of many rods and usually two baits per rod allows the crappie angler to present multiple baits at multiple depths. This ability to experiment with colors and depths can help narrow down the perfect bait and depth for that day. With these two factors figured out spider-rigging for crappie becomes a very effective way to put crappie in the boat.

There is one enemy of spider-rigging for crappie and it will be discussed in this article. This enemy of the spider-rig is current and moving through the water looking for crappie. Current can pull your baits out of the strike zone as the crappie rigging sweeps up from the drag applied by this current. Same goes for those days when the schools of crappie are scattered and you need to move along in search of them. Your lines can get tangled as you move the boat either searching for active schools or moving from brushpile to brushpile as they replenish throughout the day.

SHOP SPIDER RIGGING GEAR

These two situations can call for heavy sinkers just to keep the lines in order. I personally don’t like going heavier than a ¾ oz sinker. I’ve heard about 1 and 2 oz sinkers being used, especially in heavy wind. The heavy weight helps keep the lines straight and in order. It also allows the rod to flex with the waves. The weight transfers the up and down movement of the boat into the rod and helps keep the baits from moving as much. The weight makes it more difficult to detect bites and diminishes the fight of the crappie as it struggles against a big lead sinker. There’s an alternative to using these super heavy weights which to keep your crappie rig straight and in order.

LINE

The alternative to using these heavy weights when spider-rigging for crappie is to streamline your crappie rigging to reduce drag. It’s simple and effective and will help you catch more crappie when spider-rigging. This streamlining of your rig starts with your line. Many spider-riggers say that crappie are not line shy and use 10 or 12 pound test line or bigger for their spider-rigs. Heavier line does tangle less than light line due to its diameter and stiffness but the diameter of the line creates a lot of drag in a strong current or as you move through the water.

When I first started spider-rigging for crappie the story was that crappie are not line shy. It went against everything I had learned from my Grandfather and my Dad to always use the lightest line possible to catch more crappie. I have always used light line, 2 to 6 pound test to catch crappie. Through years of fly fishing and then learning from a few old timer slab crappie hunters I’ve come to the conclusion that the crappie aren’t necessarily shy of the line. They are deterred but the action imparted on the bait, or lack of action.

BRAID

Remember the diameter of your line is the killer of action and creates drag. I use braided line almost exclusively on my spider-rig setup. I use Spiderwire Invisibraid  and it’s nearly half the diameter of mono at double the pound test. This smaller diameter is vital to streamlining your crappie rigs. There is tremendous drag on your line and it gets worse as you do deeper. The invisibraid disappears under water, but I still go with 4 to 6 pound leader for a couple reasons.

The first reason is that I just like to use clear light line at my bait. I know people using 20 pound braid all the way to the hook and they catch more crappie than I do. I think it’s just an old fly fishing habit I can’t break, always use the lightest tippet possible for more bites. There is another reason and one many anglers that ask about losing tungsten to breakoff’s should know. When you use 15 pound braid to the swivel and then 6 pound monofilament or fluorocarbon to the hook, the line breaks before the braid. This saves your tungsten and swivel. Also with steady pressure, even on light line, a gold Aberdeen hook will bend and let go, saving your hook as well. This leads us into the next step to streamlining your spider-rigs to catch more crappie.

streamline your spider-rig for more crappie
Tungsten barrel weights help to streamline your spider rig setup for more crappie. Photo Ken McBroom

TUNGSTEN WEIGHTS

The next step to streamlining your spider-rigs is tungsten weights. I know, I know they cost too much. There are a few companies out there that sells tungsten barrel weights at a very affordable price point. The next thing I hear about tungsten weights is that they can’t afford to lose them. When rigged properly you shouldn’t lose any weights. The trick is to use the gold Aberdeen hooks and a heavier main line. This is where braid comes in. Tungsten is much denser than lead therefore it is smaller. This decrease in size reduces drag on your crappie rigs, but this isn’t the only advantage.

Tungsten is so much more dense than lead that it tends to move through cover better without hanging up. Lead will actually stick to a tree limb or manmade cover causing a hang up. Tungsten will slide over cover and structure much easier, especially when fishing rocks. Tungsten also transmits through your line and into you rod tip. This not only lets you know when your in some brush, but when a crappie bites you will see it in your rod tip. This helps you set the hook quicker and will catch you more crappie, especially when the crappie are biting light.

HOOKS

Many crappie anglers, including me for many years, shied away from small hooks when fishing for big crappie. In recent years however, I’ve been using some crappie jigs with a tiny hook and a lot of  big crappie have been caught. I am not afraid of small hooks for big crappie anymore. With the fear gone, I’ve been able to downsize my hook and streamline my crappie rigs even more. I like to use a jig at the end of my  spider-rigs because it adds a little weight and also stays ahead of the rest of the rig as it falls when dropped keeping it from tangling as easy if you let it down slowly. I use a jig even if I am using minnows.

SWIVEL

Last but certainly not least is the swivel. Large swivels is the norm on spider-rigs. They work, if you don’t mind the bulkiness and the drag that they create. I would not even use a swivel, but it’s a must when dragging baits through the water. They tend to spin and you would have a tangled mess in short order without a swivel. The smallest ball bearing swivel is what I like to use. Remember that these are crappie, your swivel can be the smallest they make. A small barrel swivel will work but a good ball bearing swivel is the way to go. They do cost a little more, but they will foul up much less than a barrel swivel. A #2 ball bearing swivel is very small and it’s easy to see that it will create much less drag in the water.

WOO Tungsten meets crappie fishing

TUNGSTEN

If you spider-rig try streamlining your crappie rigs. Tungsten is the go to weights among bass anglers, both pro and weekend anglers. If your serious about your crappie and bluegill fishing giv Tungsten a try for added sensitivity and less drag. Streamlining your crappie rigs can help you catch more crappie

 

 

Check Out

Know Your Crappie Temps

Spider Rigging for Crappie

 

About Ken McBroom 218 Articles
Ken McBroom is an accomplished outdoor writer and photographer. Growing up in Lynchburg Tennessee allowed him many opportunities afield as a boy and young man. Later in life, after Desert Storm, Ken’s wanderlust took him to Alaska to live and work and experience the last frontier. Married now with two beautiful children, Ken now calls Kentucky home where he continues to communicate our American outdoor traditions and the lifestyle it offers.